Sea water desalination
Water pretreatment system of power plant
|Filter Membrane||Polypropylene/ Glass Fiber/Polyethylene|
|Support Media||Polypropylene/Polyester fibre/ Nylon|
|Center Core||Polypropylene/Stainless steel/Polyethylene/PET|
|Outer Support Cage||Polypropylene/Stainless steel/Polyethylene/PET|
|OD (mm)||165, 152, 131, 83|
|Length （inch）||10, 20, 40, 60|
|Removal Ratings (µm)||0.5, 1, 3, 5, 10, 20, 40, 70|
|Effective Filter Area||≥6㎡/40in@152mm|
|Maximum OperatingTemperature||90 ˚C / 194 ˚F|
|Maximum Forward Differential Pressure||0.35Mpa/23℃@165mm/152mm|
It provides larger filtration area, longer service life, fewer renewal times and lower filtration cost compared with common filter elements. For the industrial application, it is an economical filter product.
Horizontal pleated design makes the filter core have super large filtration area, low pressure and high flow rate.
1. Large dirt-holding capacity and long service life
Adopting imported fine depth polypropylene fiber membrane and multiple-layer pore size filter structure design
2. specifications are customized
Pore size: from 1um to 100um for different filtering grades.
Length: commonly 20","40","60", also can be customized.
1. RO security filtration, seawater desalination pretreatment
2. Filtration of condensed water in power plants
3. Filtration of raw materials, solvents and water in bio-pharmaceutical industry
4. Filtration of bottled water, sugar, edible oil, juice, soft drinks and milk
5. Paint, Coatings, Petrochemical Industry
6. Microelectronics, Films, Fibers, Resins