High Flow Filter Cartridge - YTHF162

Yitong manufactures high-flow water filters in a 60-inch size, using PP polypropylene material. The pore size can be customized based on customer requirements, ranging from 1 to 100 microns. The available sizes include 10 inches, 20 inches, 30 inches, 40 inches, and 60 inches. These filters are capable of fully replacing PALL filter elements.

Product Feature

1. The filter utilizes a combination of five layers of filter media.

2. It employs a physical folding design, which maximizes the filtration surface area and effectively eliminates a high amount of impurities.

3. The PP polypropylene membrane meets the criteria for non-woven fabric and diversion layer, resulting in a deep filtration structure.

4. It demonstrates excellent performance under high physical pressure, ensuring a stable filtration process.

5. With its good chemical compatibility, the filter is suitable for various types of chemical filters.


1. Common uses: pre-filtration of RO reverse osmosis system

2. Chemical/petrochemical industry: various acids, bases, solvents, quench water, brine and other chemical agents

3. Power Plant: Supplementary Water, Condensate Water, Stator Cooling Water, etc.

4. General industry: various process fluids, process water, condensate, cooling water, wastewater treatment, etc.

5. Microelectronics industry: deionized water pre-filtration

6. Food and beverage industry: process water, etc.

Technical Parameter
Cartridge structureLength20 inches (508 mm), 40 inches (1016 mm), 60 inches (1524 mm)
Filter materialPolypropylene
OD6.3 inches (160mm)
ID3.5 inches (89mm)
Inner support、end cap、shellPP
Seal ring materialSilicone,Viton,EPDM,PTFE
Working situationMax.operating temperature80℃
Max. working pressure drop0.42Mpa
Maximum replacement pressure difference0.2 MPa