Hydrophilic PTFE pleated filter cartridge

Folded filter is made of polyethersulfone. The polyethersulfone is the most advanced microporous membrane in the world. The polyethersulfone membrane pores account for more than 80% of the membrane volume. The pores has a microporous geometry, thus it can raise the filtration efficiency and throughput of the highly required solution.

The filter is made of polyethersulfone and polypropylene, no adhesive, suitable for chemical and pharmaceutical industry with strict requirements.

Main features: excellent hydrophilic properties, free of surfactants and surface lubricants, providing a high level of filtration precision and flux for filtration solutions, can be applied in many PH enviroment, high rate of retention, excellent chemical resistance and thermal stability, good strength, resistance to forward and reverse pressure shock.

Technical parameters of polyethersulfone filter element:

Filter medium: hydrophilic polyethersulfone microporous membrane

Upper and lower support material: polypropylene

Support frame and structural elements: Polypropylene

Filter precision: 0.1, 0.2, 0.45, 0.65, 1 (um)

Filter Length: 5", 10", 20", 30", 40"

Sealing material: silicone rubber, nitrile rubber, ethylene propylene rubber, fluorine rubber

Sealing method: hot melt welding

Effective filter area: ≥0.6m/10"

Filter element diameter: 69.0mm

High working temperature: 85℃, 0.05MPa

High withstand temperature: 140°C, 0.28 MPa

Large positive pressure difference: 0.42 MPa (25℃)

Large back pressure difference: 0.21 MPa (25℃)

Sterilization conditions: 121°C for 30 minutes

Application of polyethersulfone filter element:

Pharmaceutical industry:

Terminal sterilization filtration of injections, water for injection, eye drops, products that cannot be sterilized by high temperature, biological products, vaccines, serum, etc.

Food industry:

Filtration of alcohol, mineral water, drinking water, beverages, etc.