The following test filteration cartridge knowledge
1, the detection of media cleanliness status
The target cleanliness of the hydraulic system and the lubrication system is determined by the manufacturer of the equipment, and the user can only know the original technical information of the equipment. In the use of the original filter to maintain the cleanliness of the system, the user can detect the degree of contamination of the system media to check whether the original filter with the system to achieve the goal of cleanliness requirements. If the system cleanliness qualified, you need to analyze the reasons, if the original filter with poor performance parameters can not reach the target cleanliness of the system, you need to discuss with the alternative filter manufacturers to improve the performance parameters of alternative filters. In short, the use of alternative filter, you must ensure that the system to achieve the goal of cleanliness.
2, to provide the original filter with the details
If you want to use a qualified alternative filter, you must provide the original filter with the details and provide a new or old original filter. So as to help replace the filter manufacturers to fully understand and master the original filter with the performance parameters and size parameters in order to obtain a satisfactory alternative filter.
Quality and structure size can be observed and try to make it easier to make judgments, and the filter filter accuracy, pollution capacity, starting pressure and other performance parameters must be tested by the corresponding test to know. Therefore, the user must ask the alternative filter manufacturers to produce the corresponding experimental results. Conditional users can also detect the performance of the filter by themselves or through a third party. Of course, the user can also detect the replacement filter after the use of the system after the cleanliness of the situation to determine the quality of alternative filter.